Basic Settings for Ubiquiti EdgeRouter

Ubiquiti EdgeRouter setup

Introduction to Ubiquiti EdgeRouter Setup :

Ubiquiti charges its EdgeMax routers as “Cutting edge Routing Technology for the Masses”. Ubiquiti’s six EdgeMax routers give fast bundle forwarding (1-2+ million parcels for each second) with shifting measures of physical ports and Power over Ethernet (PoE) ability (contingent upon model) requiring little to no effort Ubiquiti EdgeRouter Setup .

The EdgeOS working framework for EdgeMax routers is a fork of Vyatta 6.3, an open source, particular, Debian-based Linux conveyance. Vyatta has experienced numerous progressions since, including buy by Brocade, which as of late sold it to AT&T.

These exchanges don’t influence EdgeOS, in light of the fact that it depends on the open source version of Vyatta.

Ubiquiti EdgeRouter setup

EdgeOS has a Graphical User Interface (GUI), expected to rearrange configuration and an incorporated Command Line Interface (CLI) “for helpful access to cutting-edge capacities”. Tim’s first take a gander at the EdgeRouter Lite (ERLite) with EdgeOS v1.0.2 in 2013 and my survey of the EdgeRouter Pro with EdgeOS v1.4.0 in 2014 both finished up EdgeRouter execution was great, yet convenience was most certainly not.

In spite of the fact that EdgeOS is full-included, a large number of those highlights required utilizing the CLI, which put it past the attitudes of most purchaser router customers. Be that as it may, with “gigabit”— or if nothing else 500 Mbps+—web access ending up more typical in the U.S.

Furthermore, the ERLite’s notoriety for being both quick and modest, we thought the time had come to return to whether the ERLite should even now convey a “not for networking amateurs” admonition.

In this audit, I will investigate the ERLite with EdgeOS v1.9.1. Aside from a switch to a metal case from plastic, equipment in the EdgeRouter Lite hasn’t transformed from our unique survey (Cavium double center CN5020 @ 500 MHz with 512 MB RAM). So, I’ll focus this audit on the highlights and convenience of EdgeOS v1.9.1.

Since our router test process has developed and turned out to be harder, we’ll additionally observe whether the ERLite still procures its notoriety for being “gigabit” review. In this post, we will talk about some basic settings of this router through Ubiquiti EdgeRouter setup page.

Ubiquiti EdgeRouter setup

Basic settings for Ubiquiti EdgeRouter Setup :

EdgeOS is a ground-breaking, modern operating system that deals with your EdgeRouter. It offers both a browser‑based interface (EdgeOS Configuration Interface) for simple configuration and a Command Line Interface (CLI) for cutting-edge configuration. To get to the EdgeOS Configuration Interface:

  1. Associate an Ethernet link from the Ethernet port of your PC to the port marked eth0 on the EdgeRouter.
  2. Configure the Ethernet connector on your PC with a static IP address on the 192.168.1.x subnet (e.g., Note: As an option, you can associate a serial link to the Console port of the Ubiquiti EdgeRouter setup . See “Direction Line Interface” on page 89 for more data. 3. Dispatch your internet browser. Type in the location field. Press enter (PC) or return (Mac).
  3. The login screen will show up. Enter ubnt in the Username and Password fields. Read the Ubiquiti License Agreement, and check the crate by I consent to the terms of this License Agreement to acknowledge it. Snap Login.

The EdgeOS Configuration Interface will show up, allowing you to redo your settings as required.

Note: To upgrade security, we suggest that you change the default login utilizing one of the following:

  • Set up another client account on the Users > Local tab (favored alternative). For subtle elements, go to “Neighborhood”
  • Change the default secret word of the event login on the Users > Local tab. For points of interest, finally, one has to go “Configure the User”.


Please enter your comment!
Please enter your name here