I Can’t Access Login Page for My TP-Link Repeater Device

0
140
http //tplinkrepeater.net admin
tp link point to point configuration

Wi-Fi extender or repeaters are the devices that amplify the range of a Wi-Fi router. Wi-Fi has become very important as with these you can connect any number of wireless devices with your home network. But the Wi-Fi router you use at home is not strong that they can evencover all parts of your home. So, there would be places in your home where you access Wi-Finetwork fluently and so paces where it will be barely hanging on. Wi-Fi repeaters come in these situations as they will take and amplify the Wi-Fi signal of your home network and then forward it to cover the dead spots. http //tplinkrepeater.net login

But before you could use the Wi-Fi repeater or range extenders, you would need to login to your router login page for managing its settings. But some users have complained that they can’t access their TP-link repeater login page at http //tplinkrepeater.net login.It is very easy for users to configure and manage their Wi-Fi range extender with the help of web interface. But being able to login to http //tplinkrepeater.net login, users can’t configure their wireless router. If you are like these users, you can take the assistance of the following tips to fix the error.

 tp link router as access point
http //tplinkrepeater.net login

1. Check the network connection – http //tplinkrepeater.net login

If you can’t reach the http //tplinkrepeater.net login, then the possible reason can be that the network wires of Wi-Fiaren’tconnected properly to the computer. In case of wireless connection, you need to make sure your device is connected to the TP-Link Wi-Fi.

tplinkrepeater net admin
tp link router as access point

2. Reset the TP-link device

There are also possiblereasonsthat someone mistakenlychanges the IP address or other settings for your TP-link repeater device. So, you can try resetting your TP-link device to factory defaults so that it will clear any fault; by settings or changes make mistakenly. To reset your TP-link repeater device, press the Reset button at the back until the LED flashes and then wait for the device to reboot again. You may need to use a PIN to reach the Reset button. After its rebooted to its factory defaults, you can try again try to reach the http //tplinkrepeater.net login.

http //tplinkrepeater.net admin
setting access point tplinkap.net tp link

3. Do a PING test

You can also try a PING test to make sure the host you are trying to reach is available at the IP address. This is partially effective to know whether the problem is with your network or some other reasons. You can do a PING test by filling in the IP address of the http //tplinkrepeater.net login with the PING command in the command prompt.

tp link router as access point
tplinkrepeater net admin

4. Delete DNS cache

DNS cache on your computer can also cause many types of network problems and you unable to reach the http //tplinkrepeater.net login may be result of this. Clear the DNS cache using the “flushdns” command.

5. Try a different web browser

Sometimes a web browser may have incompatible settings that may be required to open a website. So, you can try a different web browser to reach the http //tplinkrepeater.net login.

LEAVE A REPLY

Please enter your comment!
Please enter your name here