With regards to routers, Netgear is the name that everybody more likely than not knew about. Netgear is among the best networking device makers delivering Wi-Fi routers, range extenders, or other networking devices like switches, center points and so on. www mywifiext net login
Netgear routers have been known for its dependability, convenience, and prevalent performance. Netgear Nighthawk is the best routers from Netgear. The greatest advantage of utilizing a Netgear Nighthawk router is the simplicity of setting them up and also changing the setting a short time later.www.routerlogin net setup is the webpage to setup Nighthawk router and www mywifiext net login is used for repeater setup. You can setup your router and repeater either through the internet setup wizard at or the Netgear Genie app.
Turn Nighthawk router into a repeater
Usually, people have a router to broadcast their home internet wirelessly, and a repeater or wifi extender to extend its range. But if you have two Nighthawk routers, but no repeater then you can also use the Nighthawk router as a repeater. After setting up the repeater, you can use the www mywifiext net login to login to the repeater and start using it. The Nighthawk router can be setup as a repeater by changing the settings of the router from the router login. In the next section, you can learn how to configure the Nighthawk router as a Wi-Fi extender.
How to configure Nighthawk router as Wi-Fi extender? | www mywifiext net login
Step 1: Launch a web browser onyour computer or a smartphone or other wireless device that is connected to the network of the router to be the repeater.
Step 2: Then, enter the following address in the address bar of the browser – http www.routerlogin.net and press Enter. You can use the alternatives URLs if the http://www.routerlogin.net does not work.
Step 3: Now, you will be prompted to enter a username and password. You need to enter the default login credentials – username as “admin” and password as “password”.
Note: As username and password are both cases sensitive, you need to make sure that you enter the login credentials correctly. If the default login credentials do not work, it is possible that you might have changed the password. Then, you need to enter the changed password.
Step 4: Now, in the Netgear Genie interface, select Wireless and verify that the wireless settings match the base unit exactly.
Step 5: Then, navigate to Advanced > Advanced Setup > Wireless Repeating and Enable Wireless Repeating Function.
Step 6: Next, select Wireless Repeater and enter the IP address of the repeater routerin the Repeater IP Address field.
Step 7: Select Disable Wireless Client Association if you want to allow LAN client associations only and don’t want wireless clients from associating with the repeater.
Step 8: Enter the MAC addresses for the access point that will be the base station in the respective field and click Apply.
Step 9: Now, you can connect the devices across LAN’s on both wired or wireless connections.