Point by point steps to configure TP-link router as Hotpot link: | http //tplinklogin.net
Turn on the settings from the operation mode to Share Hotspot after that plug in the router’s power adapter into an electrical outlet ( http //tplinklogin.net )
Then hook up any of the devices to the router by means of wireless connection or via Ethernet Cable. Here you’ll be asked for the Wi-Fi security name and password to access the internet.
Now make the TCP/IP protocol to get the actual IP address in your device. Then visit http //tplinklogin.net there enters the username and password you set for the router. While entering the password and username make sure that you’ve given the characters in lowercase.
Afterwards, go to the settings of Quick Setup where you’ve to pick the time zone and hit on the Next to shift to the further steps.
In this step choose the connection type as WAN but the connection type will differ as per the working station in the case when the router is placed in the compact room then fix the setting as Dynamic IP.
For instance, if you choose the Dynamic IP means you have to select the option of clone the MAC address if not need then skip that option. While to look for other connection types, please enter the parameters provided by your ISP, and then click Next.
Now pick the band range that is 2.4GHz or 5GHz and then click on the Survey to check for the available public WiFi password which is presented in the Wireless Password then click Next
Here you have two options that are whether to customize you’re Network Names (SSIDs) and Passwords or leave that as such this step is up to your consideration and then click Next.
Finally click on Save to apply all the changes to made and don’t forget to click next for all the steps to make the proper connection visit http //tplinklogin.net.