In this fast pace of world, internet is the basic necessity for every person throughout the world. With the smartness of technology, now one can easily sync all device with each other using wireless network www.routerlogin.net. Wireless connection is technology to share packet wireless without need of any wired connection. Thanks to router that makes it possible. On the internet, you will find a wide range of routers. For a layman it is not an easy job to choose best Wi-Fi router as per your needs. But, there are some common names such as Netgear that is used by millions of users all across the world.
Have Netgear Wi-Fi router but, don’t know how to configure it using Netgear Genie? Follow this article to get the best solution to your question through www.routerlogin.net .
How to configure your router for cable internet connection with Netgear genie? www.routerlogin.net
Step 1: At the very first step, you have to unplug your modem from the power source.
Note: if your router have integrated battery then, you can remove it temporary.
Step 2: Now, one has to connect the modem to the Wi-Fi router using Ethernet cable.
Step 3: Connect the computer to the router using LAN cable.
Step 4: After that, you have to plug the power source cable to the modem or reinsert the battery if you removed it earlier.
Step 5: You have to reconnect the power to the router and wait for a couple of seconds until the power LED light turn to solid green.
Step 6: Once the above steps successfully completed, open a web browser such as Google Chrome, Mozilla Firefox, or Internet Explorer on your computer.
Step 7: On the web browser, one has to enter www.routerlogin.net or type http://192.168.1.1 or http://192.168.0.1” and press the “Enter” button.
Step 8: After you log on to the above address, you will direct to its online dashboard where one has to enter the “username” and password of your Wi-Fi router.
Step 9: Enter username as Admin and enter password in the password text field and hit on the “Log in” button.
Step 10: After successfully logged in, you have to click on the “Advanced” tab and choose “Setup Wizard”.
Step 11: Setup Wizard interface will appear, click on the “Yes” radio button and hit on the “Next” button.
Step 12: Once the setup process completed, congratulation message will appear and click on the “Take me to the internet”.
Hopefully, you have learned how to configure your router for cable internet connection through www.routerlogin.net