Recently bought Netgear router but, don’t know how to configure the router for satellite connection? Read this article to know How to configure your router for satellite connection from http //routerlogin.net .
How to configure your router for satellite connection? http //routerlogin.net
Step 1: First of all, you have to change the router IP address because the IP address of both router and modem is same.
Step 2: You have to disconnect the router from the modem and connect the computer to the router using LAN cable.
Step 3: Now, one has to turn on the router and open a web browser on the computer.
Step 4: After that, one has to open the http //routerlogin.net by typing http://routerlogin.net or simple enter https://192.168.0.1 and hit on the “Enter” button.
Step 5: Now, you are required to enter the username and the password. Simply, enter the admin in the username and password in the password field.
Step 6: Once you enter the valid username and the password and click on the “OK” button.
Step 7: Online web-based dashboard will appear with some options. Click on the “LAN IP Setup” under the Advanced category.
Step 8: LAN IP Setup interface will appear, change the internet protocol address to 192.168.10.1.
Step 9: You have to assign 192.168.10.2 for starting IP address.
Step 10: Assign 192.168.10.51 to the ending IP address.
Step 11: Once the above process completed, click on the “Apply” button. An error will appear with the message “Page cannot displayed” or “Action Cancelled”.
Step 12: You have to close the web browser and power off the router.
Step 13: After that, connect the modem to the router and turn wireless router again.
Step 14: Once the above step completed, one has to restart the computer and open web browser after restart done.
Step 15: You have to enter the http://192.168.10.1 or go the http //routerlogin.net. This will direct you to setup wizard login interface.
Step 16: Enter the login details such as username and password and hit on the “OK” button.
Step 17: You have to click on the “Setup Wizard” which is placed at the left of the router settings page.
Step 18: Click on the “Next” button and hit on “Apply” button.
Step 19: Finally, click on the “Logout” button to sign out of the router settings interface.
So, this is a guide to configure the router for satellite connection. Still, have a problem? Shoot down the query in the comment box.