The wireless network is the perfect alternative toa wired network that enables the computers to communicate with another computer wirelessly without any physical connection. But, the wireless network has some limitations like limited range. Luckily, there are repeaters or range extender devices available that assist the computer to make the wireless range more strong by boosting it. The main advantage of using a wireless extender is that it will improve the wireless range. With the fast advent of technology and innovation, there are lots of wireless range extender devices available. Today, we are talking about such device called D-Link DAP-1320 Wi-Fi range extender device. Have just bought this device and want to know how to setup? Well, here in this post we will talk about how to setup D-Link DAP-1320 with httpdlinkap local login.
How to setup D-Link DAP-1320 Wi-FI Range Extender Device? httpdlinkap local login
Step 1: First of all, you have to plug the D-Link DAP-1320 into the wall outlet and makesure the LED light is turned from RED to blinking state.
Step 2: After that, you have to press the WPS button that is available on your AP/Router. Normally, the LED light will blink when you press the WPS button. You can open its manual to know more about it’s in detail.
Step 3: Now, you have to press and hold the WPS button until the green LED light start blinking. The process of WPS will take couples of minutes. If the connection successfully made, the green blinking light will turn into solid green.
Step 4: once the connection successfully made the light turns in to solid green. If it is failed, try to keep the D-Link DAP-1320 to near of router, maybe it is able to identify your router due to low signals.
Step 5: To connect your wireless client to the D-Link DAP-1320, one has to enter the wireless network name and Wi-Fi password on the configuration note.
If you want web browser setup then, you can visit httpdlinkap local loginand fill the required information. Follow the below steps for web browser setup.
How to configure web browser setup of D-Link DAP-1320?
Step 1: First of all, you have to open httpdlinkap local login page by entering http://dlinkap.local on the web browser address bar.
Note: In case, you have multiple devices on the network, you can access httpdlinkap local login by entering https://dlinkap.local on the address bar.
Step 2: Now, you have to enter username and password. Admin is username and password is blank.
Step 3: After that, configuration interface will appear, you have to click on the “Launch wireless setup wizard” and hit on the “Continue” button.
Step 4: Go to “Extended Wi-Fi setup”, enter wireless network name and password for your extended network.
Step 5: Now, click on the “Next” button to continue and hit on “Save” button.
The above guide is tosetupweb-based configuration from httpdlinkap local login page.