Well, if you are willing to get a much more immersive experience with your Belkin NetCam, you will possibly need to update your device. To be honest, almost all of us the importance of NetCam Login and how useful they are in our daily workability schedule.
As of now, in the 21st century, the process of updating your device has become a lot simpler. And, by doing netcam login, you can easily follow the below steps, follow them and do the needful.
How to update firmware for Belkin NetCam? netcam login
Step 1: At first, all you will need to do is to open your web browser and go to netcam login. In case, if you want the direct address, https://netcam.belkin.com will be of utmost help for you. After that, you will be directed to your NetCam Login Account.
Step 2: here, you will see a dashboard popup right in front of your computer screen. On your Dashboard, you must select the camera option after which, move to step 3.
Step 3: Here, you must click on the Camera Settings after you have done the netcam login and have done the top two steps.
Step 4: Now, Under the Audio section, find the Firmware Version of your respective camera. Here, you will also find some other firmware versions also. Hence, you will have to note down your camera number to eliminate any sorts of ambiguity.
Step 5: After finding the respective Firmware Version, click on the “Update Now” option. Here, your NetCam will take around 5 to 10 minutes for updating your firmware. And, after all the hard work, if you have done things correctly, you can successfully install the latest firmware, for sure.
The Update Now Option will only appear if your camera wants the latest firmware update. Other than that, your NetCam is perfectly fine and is ready to be used, in any situation.
How to update firmware for Belkin NetCam Using App?
As of now, you must have done the NetCam Firmware update by netcam login and following some easy steps. However, in case if are using your mobile and want to update it from there itself, still it is feasible.
Step 1: Launch your NetCam App on your particular Mobile Phone.
Step 2: Here, go on searching the Camera Device List and select the camera which you want to use. Now, after selecting the camera, a notification will pop-up if there is any room for the update.
Important Note 1
If you are only having the setup of one NetCam on your Account, you will be redirected straight to the Live Feed Screen.
Step 3: Now, click on the Firmware Update Available to proceed further.
Step 4: Click on the Update NetCam FW for the continuation process with the update.
Important Note 2
During the updating process, your camera will be unavailable for viewing purpose.
Step 5: Now, you will see a firmware updating startup, popping up. Click on the close(X) option to close it.
Step 6: You will be able to view the overall update status of your NetCam. And, now, wait for the update to finish its process.
Step 7: Click to Finish the Update.
So, there you go. Updating the firmware for Belkin Netcam either by netcam login or by NetCam app is easier than it may seem. Hence, go through the above process, follow the steps properly and you will successfully do the needful, sooner or later.