Linksys manufactures RE6350 and it is one of the best extender devices from the brand. The Linksys RE6350 Range Extender supports all Wi-Fi routers. There’s no need to modify the current router’s settings when installing the extender–you won’t have to interfere with your router at all. After http:// extender Linksys setup it can be easily used.
The http:// extender Linksys setup page will guide you step by step procedure to setup the Linksys RE6350 .
Plug in the Linksys RE6350 to a power outlet. The light indicator will turn to orange.
NOTE: Plug the range extender into a power outlet midway between the router and the dead zone.
Connect to the range extender’s default Wi-Fi name, Linksys Extender Setup, with a wireless PC or a tablet.
Note: wireless computer or tablet must have a steady Wi-Fi signal from the router.
Enter “http:// extender Linksys setup” or “192.168.1.1” in the address bar of any web browser and press ENTER to launch the Setup Wizard.
Read and agree to the End User License Agreement then click Start Setup.
When prompted, select your Wi-Fi name.
Enter your Network Password, or security key then click Next.
A _Ext suffix will be added to your Network name. If you would like to customize the set Network name, Password and Security mode of your range extender’s 2.4 GHz and 5 GHz bands, enter and select them in the fields provided. Otherwise, click on Next.
The Spot Finder page will pop up. This feature defines the signal strength between the range extender and the router. If the range extender is too close or too far from your router, click the find better location button.
Once you have found this location for the range extender, click Back to continue with the setup wizard.
Create and verify your admin password. For easy recovery in future, you can create an optional password hint. Click Save once it is done.
Enter your email Id and sign up for the range extender. If you have already registered to your range extender, click Skip to proceed.
The range extender will go through a firmware checkup. If new firmware is available, it will proceed with the update. Otherwise, it will continue to the next step.
Connect to the range extender’s Wi-Fi name and once the button labeled Next turns blue, click on it.